Αντλίες Νερού

With the aid of the connection adapter (6.997-473.0) can be connected quickly and safely to a water supply with a pump with internal thread internal thread. The adapter seals without sealing tape and has the connecting thread G1 (33.3 mm) to G1 (33.3 mm).

Using the 2-way connection adapter (6.997-474.0) Karcher can be a pump with a female thread connect quickly and safely with two water connections with internal thread, and flexible use with one or two active outlets. Either both sides disposals or disposal can run laterally and the other upwards. Connecting thread: G1 "(33,3mm) to G1" (33,3mm).

The pump connection piece (6.997-359.0) is used for vacuum-tight connection of suction hoses at Garden pumps, pumps electronic and domestic water works. The connector provides a suitable solution for pumps with G1-connecting thread (33,3mm) and 3/4 "- or 1" hoses. It comes with a screw cap, a hose clamp, a gasket and a check valve are included. The check valve may be used in submersible pumps or submersible pump pressure in order to prevent the return of the water into the pump. In all other cases, the gasket is used instead of the check valve used.

The robust and easy-to-install pre-filter can be optionally attached to the submersible pump. The use of the pre-filter is particularly recommended for the pump is used in heavily contaminated water in pits or flooding. With the filter large particles of dirt can be retained from entering the pump. This protects the pump impeller and prevents clogging of the pump by branches or dirt particles, thus increasing its reliability. The pump pre is suitable for submersible pumps SP 1 to SP 5 Flat / Dirt and has a mesh size of about 5 millimeters.

With the Perfect Connect Suction 1.5m for 1 "-Ansaugrohrleitungen (25mm) you can connect the pump directly to a pipe in the house easily. The set includes a vacuum-tight 1.5-meter suction hose with a diameter of 3/4" and on both sides G1 connection thread (33.3 mm) and a connector for 1 "-Ansaugrohrleitungen. This set can be connected to the suction side of garden pumps, water dispensers and -werken for domestic water supply easy. Its high flexibility results in significant noise reduction at fixed installations. the Kärcher Perfect Connect sealing principle of BP's accessories also allows quick and easy assembly and seals particularly reliably, for trouble-free operation of the pumps.

With the Kärcher pump spray bottle cleaning and care products can be easily applied. Spray and angle can be adjusted continuously.

The suction hose set (4173645) Einhell is 7 meters long and has a 30,3mm (1 ") internal thread connection and a foot valve. It is suitable for garden pumps and domestic water works.

The connection set Karcher Perfect Connect Suction 3/4 "can be connected directly to the pump and includes a vacuum-tight 3.5 meter pump suction hose with a diameter of 3/4" for drawing water from alternative sources. equipped with suction filter and backflow stop, the suction assembly can easily be connected to the suction side of garden pumps, pumps electronic and domestic water plants for domestic water supply. The integrated backflow stop is ideal to prevent the backflow of pumped water and to shorten the re-suction. The Perfect Connect Suction 3/4 "can also be used as an extension of the spiral tube and is suitable for pumps with G1 connection thread (33.3 mm). The Kärcher Perfect Connect Sealing principle of BP's accessories also allows easy installation, seals particularly reliably and enables trouble-free operation of the pumps.

The robust pump prefilter 4173851 Einhell protect domestic waterworks, garden pumps and tank units from contamination. The fine filter is washable and easy to replace.

The robust pump prefilter 4173801 Einhell protect domestic waterworks, garden pumps and tank units from contamination. The fine filter is washable and easy to replace.

The connection set Karcher Perfect Connect Suction 3/4 "can be connected directly to the pump and includes a vacuum-tight 3.5 meter pump suction hose with a diameter of 3/4" for drawing water from alternative sources. equipped with suction filter and backflow stop, the suction assembly can easily be connected to the suction side of garden pumps, pumps electronic and domestic water plants for domestic water supply. The integrated backflow stop is ideal to prevent the backflow of pumped water and to shorten the re-suction. The Perfect Connect Suction 3/4 "can also be used as an extension of the spiral tube and is suitable for pumps with G1 connection thread (33.3 mm). The Kärcher Perfect Connect Sealing principle of BP's accessories also allows easy installation, seals particularly reliably and enables trouble-free operation of the pumps.

The small Perfect Connect pump pre 2.997-211.0 Kärcher puts an end to coarse dirt particles and sand in common garden pumps, tank units and house waterworks and thus increases the life of the equipment. The pre-filter is particularly suitable for devices without a built-in filter with a flow rate up to 4000 l / h and a G1-connecting thread (33.3 mm). For effortless cleaning the filter insert can simply be removed. The mesh width of the fine filter is 250 microns (0.25 mm). Thanks to the radial Perfect Connect sealing principle of the new BP supplies a reliable seal and playing simple installation are possible.

The big Perfect Connect pump pre 2.997-210.0 Kärcher puts an end to coarse dirt particles and sand in common garden pumps, tank units and house waterworks and thus increases the life of the equipment. The pre-filter is particularly suitable for devices without a built-in filter with a flow rate up to 6000 l / h and a G1-connecting thread (33.3 mm). For effortless cleaning the filter insert can simply be removed. The mesh width of the fine filter is 250 microns (0.25 mm). Thanks to the radial Perfect Connect sealing principle of the new BP supplies a reliable seal and playing simple installation are possible.

With a maximum pumping capacity of 5,500 liters per hour, the drainage pump SP 1 Dirt the perfect entry-level model for the rapid decrease or pumping of rain barrels and garden ponds. It pumps reliably clean and dirty water with up to 20 millimeters large dirt particles. To remove stubborn dirt is an optional pre-filter can also attach that protects the pump impeller against blockage example by branches. The well-known from the professional sector and built in all submersible pump mechanical seal allows also an extra long life of the pump. The waste water immersion pump is also equipped with a float switch that turns the device depending on the water level and off, thereby preventing a dry running. And thanks to the attachment options for the float switch, the pump can be operated at low water to a residual water height of 25 millimeters. Also handy: The Quick Connect connector socket enables a very quick and easy hookup of 1 1/4 "-hoses.

The flachabsaugende submersible pump SP 2 Flat reliably helps when pumping clear or slightly muddy water with up to 5 millimeters in size dirt particles. Up to 6,000 l / h, it is ideal for dewatering smaller pools or flooded by ground water inlet or washing machines leakage cellars. A robust mechanical seal makes the pump an extra durable. A float switch switches the pump depending on the water level on and off, thus preventing a dry running. And thanks to the attachment options for the float, it can also be used at low water level in continuous operation. The SP 2 Flat also has a foldable foot stand, by their unfolding a higher flow rate is achieved. When folding of the feet, the clear water submersible pump already starts at a water level of 7 millimeters and pumps out even down to 1 millimeter wipe dry in continuous operation. And via QuickConnect connection piece is 1 1/4 "hoses can be connected quickly and easily.