Δράπανο

The 10-part Druckluftzubehörset 4020565 Einhell includes a pneumatic impact wrench, a short blow gun, a tire inflation gauge, an adapter kit (1x ball needle, 1x for bicycle tires) (a tissue extension hose and a set of four socket wrench inserts 17mm, 19mm , 22mm, 24mm). The pneumatic impact wrench has a working pressure of max. 6.3 bar, a loosening torque of max. 312 Nm, an air consumption of 141 l / min and a 1/2 "-. Square mount the tire inflator operates at a pressure of 0 - 8 bar, the display goes from 0 -. 12 bar The 15 meter air-fabric hose having a diameter of 9mm.

The hammer drill KD975K has an SDS-plus tool holder and a pneumatic hammer mechanism for drilling, even in the toughest concrete. optimum adaptation to the material to be drilled is possible by speed selection and electronics. It can be used for hammer drilling, drilling or with spindle lock also for chiselling. High impact speed and powerful 1.8 Joule impact energy round off the image of the hammer drill KD975K.

The Makita impact drill HP1631KX3 is a professional machine for universal use with high drilling performance with little vibration. A keyless chuck allows for quick and easy tool change. The powerful 710 watt motor with high power reserves that switched on and off in stormy weather and the compact design allow efficient working. The rotating carbon brush bridge ensures optimum power output in forward and reverse operation. The impact drill HP1631KX3 is delivered in a transport case including a 74-part accessory kit (bits and drills).

The Makita hammer drill HR2470 is a compact device. It is suitable for drilling, screwdriving, hammer drilling and chiseling with its 780-watt motor. The machine has a vibration damping by an inlaid rubber pads for secure grip and comfortable working. The speed and blow can be controlled via the accelerator switch. A slip clutch protects the user from injury. The hammer drill HR2470 is with the impact stop and forward / reverse function even for driving screws.

The DeWalt hammer drill D25033K is very powerful and handy. It has an output of 710 watts, provides sufficient power for drilling and hammering in concrete and masonry. The hammer with 2 Joule impact strength ensures clout in hard materials regardless of the feed pressure. The tool insert can change very quickly and without extra key in the hammer drill D25033K thanks to SDS-plus tool holder.

The Makita cordless hammer drill DHR171Z for SDS-PLUS is suitable for drilling and hammer drilling. By using a brushless BL (brushless) motor, the battery capacity is used more efficiently than with conventional electric motors. The SDS-PLUS tool holder allows a very quick change of tool use. Even darker work areas are not a problem, because the bright LED brings light into the darkest corners. In addition, the DHR171Z has an adjustable speed, forward / reverse operation, and an auxiliary handle with depth stop.

The Makita impact drill HP2071J is a professional machine for use on construction sites. A keyless chuck allows for quick and easy tool change. Optimized power usage at forward / reverse operation offer the rotating brushes. the speed on the accelerator switch can be easily between zero and regulate maximum, which allows a metered works, for example, when drilling and when driving screws. Very good drilling performance provides the optimally tuned percussion of the hammer drill HP2071J. The 1010-watt engine has very high power reserves.

The cordless hammer DHP481Z is a powerhouse with 115 Nm, 2-speed full metal planetary gear and a switchable percussion. The torque can be adjusted by 21 steps plus drilling optimal. Darker areas of work are not a problem, because the luminous dual LED with Nachglimmfunktion brings light into the darkest corners. Thanks to the quick-change of use of tools is in seconds. Speed ​​and impact rate of the battery Schlagbohrschraubers DHP481Z can be easily via the electronic switch infinitely variable.

The Makita impact drill HP2051FJ is a professional machine for use on construction sites. A keyless chuck allows for quick and easy tool change. the speed on the accelerator switch can be easily between zero and regulate maximum, which allows a metered works, for example, when drilling and when driving screws. Very good drilling performance provides the optimally tuned percussion of the hammer drill HP2051FJ. The 720-watt motor has high power reserves. With the integrated LED you have your work exactly in mind.

The Makita Cordless Hammer DHR243Z for SDS-PLUS has a 18 volt drive, it is suitable for drilling, hammer drilling and chiseling. By using a brushless BL (brushless) motor, the battery capacity is used more efficiently than with conventional electric motors. The SDS-plus tool holder allows a very quick change of tool use. In addition, the DHR243Z has a dust-proof tool holder, and a 40-fold chisel adjustment.

The Makita cordless hammer drill DHR171RAJ is especially handy thanks to the compact, short design and is suitable for drilling and hammer drilling. The brushless motor allows more stamina, longer life and a more compact design. The SDS-PLUS tool holder allows a very quick change of tool use. The housing / handle construction is designed for very low vibration. Even darker work areas are not a problem, because the bright LED with Nachglimmfunktion brings light into the darkest corners. In addition, the DHR171RAJ has an electronically adjustable speed, forward / reverse operation, and an auxiliary handle with depth stop.

The Makita Cordless Hammer DHR280ZJ has a powerful engine which is operated with two 18-volt lithium-ion batteries. The brushless motor allows more stamina, longer life and a more compact design. The anti-vibration technology AVT and SoftNoLoad provide less vibration and precise placement of the chisel or drill. The additional handle provides a secure grip and comfortable working and the Ausrastkupplung protects the user in abrupt blocking. With the depth stop, the exact drill depth can be easily and safely adjust.

The Bosch cordless rotary hammer GBH 36 V-EC Professional Compact provides up to 160 wells (6 x 40 mm in concrete C30 / 37) with one charge. The pneumatic hammer mechanism is optimized for 4 - 12 mm in concrete (max. 18mm). The Bosch Electronic Cell Protection (ECP) protects the battery against overload, overheating and total discharge. The quick charging system Bosch Hyper Charge charges batteries after only half of the regular charging time to 75%. Since the batteries have no memory effect, they can be regardless of the charging state at any time without charge damaging the cells. A practical battery charge status display with three LEDs are at all times on the remaining energy.