Εύρος τιμής

0 - 50 (66)
50 - 100 (15)
100 - 200 (0)
200 - 400 (1)
400 - 800 (0)
800 - 1600 (0)
1600 - 3200 (0)
3200 - 6400 (0)
6400 - 12800 (0)
12800 - 25600 (0)

Αξεσουάρ Τρυπανιών

Προβολή 1–15 από 82 Αποτελέσματα

BOSCH HAMMER DRILL BITS SDS-PLUS-5, Ø 8MM WORKING LENGTH 100MM

BOSCH HAMMER DRILL BITS SDS-PLUS-5, Ø 8MM WORKING LENGTH 100MM

The SDS-plus-5 drill Bosch allows effortless drilling in masonry and concrete. For a smooth operation of the hard metal plate is provided with grooves and having notches, the more readily penetrate the masonry and prevent seizure in the concrete. The Activteq-centering ensures active cutting in concrete and precise hole diameter. Based on the wear mark is to identify whether the hole diameter is still within the tolerance for the matching plugs. In addition, the AWB brazing and curing technology reduces vibration during drilling. The SDS-plus-5 drills is compatible with rotary hammers with SDS-plus system.

2,88 €

Διαθέσιμο σε 15 εργάσιμες

Αγορά
BOSCH MULTIPURPOSE DRILL CYL-9 MULTI CONSTRUCTION, Ø 5MM

BOSCH MULTIPURPOSE DRILL CYL-9 MULTI CONSTRUCTION, Ø 5MM

The CYL-9 Multi Construction drill enables stable drilling in all materials. The centering supports an accurate Bohrstart with guide. The AWB brazing and curing technology makes the two-Schneider robust and reduces vibration during drilling. In addition, the 4-spiral Dura-design with reinforced core section for better wear resistance and stability during drilling of concrete makes. The drill is suitable for virtually all materials in interior construction, e.g. Concrete, masonry, bricks, cement asbestos, lightweight building materials, layered materials, ceramics, and tile, wood, plastic, sheet metal and aluminum. It is suitable with cylindrical shaft systems for all impact drills and ensures perfect results when drilling with or without impact. The CYL-9 Multi Construction drill is equipped with diamond-ground cutting edges and a specially ground for multi-purpose top. This drill consists of highly durable carbide fine grit, provides an extra long service life and optimal wear resistance.

3,25 €

Διαθέσιμο σε 15 εργάσιμες

Αγορά
BOSCH MULTIPURPOSE DRILL CYL-9 MULTI CONSTRUCTION, Ø 10MM

BOSCH MULTIPURPOSE DRILL CYL-9 MULTI CONSTRUCTION, Ø 10MM

The CYL-9 Multi Construction drill enables stable drilling in all materials. The centering supports an accurate Bohrstart with guide. The AWB brazing and curing technology makes the two-Schneider robust and reduces vibration during drilling. In addition, the 4-spiral Dura-design with reinforced core section for better wear resistance and stability during drilling of concrete makes. The drill is suitable for virtually all materials in interior construction, e.g. Concrete, masonry, bricks, cement asbestos, lightweight building materials, layered materials, ceramics, and tile, wood, plastic, sheet metal and aluminum. It is suitable with cylindrical shaft systems for all impact drills and ensures perfect results when drilling with or without impact. The CYL-9 Multi Construction drill is equipped with diamond-ground cutting edges and a specially ground for multi-purpose top. This drill consists of highly durable carbide fine grit, provides an extra long service life and optimal wear resistance.

4,65 €

Διαθέσιμο σε 15 εργάσιμες

Αγορά
BOSCH HAMMER DRILL BITS SDS-PLUS-7X, Ø 6MM WORKING LENGTH 50MM

BOSCH HAMMER DRILL BITS SDS-PLUS-7X, Ø 6MM WORKING LENGTH 50MM

The SDS-plus 7X drills from Bosch offers an excellent service life when drilling in concrete. His 4-cutter full head is made out of high quality tungsten carbide, which increases the head and provides impact resistance. The continuous distribution of drilling force creates no power loss, which increases the overall service life. The diffusion welding technology (IDS) from Bosch achieved strong grip between the head and neck. In addition, the 4-helical design ensures the wide channels the effective Bohrmehlabtransport and so reduces the wear on the drill. The SDS-plus-7X drill bit is provided for use with rotary hammers with SDS-plus system in masonry, concrete and reinforced concrete. Based on the wear mark is to identify whether the hole diameter is still within the tolerance for the matching plugs.

5,38 €

Διαθέσιμο σε 15 εργάσιμες

Αγορά
BOSCH HAMMER DRILL BITS SDS-PLUS-7X, Ø 6MM WORKING LENGTH 100MM

BOSCH HAMMER DRILL BITS SDS-PLUS-7X, Ø 6MM WORKING LENGTH 100MM

The SDS-plus 7X drills from Bosch offers an excellent service life when drilling in concrete. His 4-cutter full head is made out of high quality tungsten carbide, which increases the head and provides impact resistance. The continuous distribution of drilling force creates no power loss, which increases the overall service life. The diffusion welding technology (IDS) from Bosch achieved strong grip between the head and neck. In addition, the 4-helical design ensures the wide channels the effective Bohrmehlabtransport and so reduces the wear on the drill. The SDS-plus-7X drill bit is provided for use with rotary hammers with SDS-plus system in masonry, concrete and reinforced concrete. Based on the wear mark is to identify whether the hole diameter is still within the tolerance for the matching plugs.

5,38 €

Διαθέσιμο σε 15 εργάσιμες

Αγορά
BOSCH HAMMER DRILL BITS SDS-PLUS-7X, Ø 8MM WORKING LENGTH 100MM

BOSCH HAMMER DRILL BITS SDS-PLUS-7X, Ø 8MM WORKING LENGTH 100MM

The SDS-plus 7X drills from Bosch offers an excellent service life when drilling in concrete. His 4-cutter full head is made out of high quality tungsten carbide, which increases the head and provides impact resistance. The continuous distribution of drilling force creates no power loss, which increases the overall service life. The diffusion welding technology (IDS) from Bosch achieved strong grip between the head and neck. In addition, the 4-helical design ensures the wide channels the effective Bohrmehlabtransport and so reduces the wear on the drill. The SDS-plus-7X drill bit is provided for use with rotary hammers with SDS-plus system in masonry, concrete and reinforced concrete. Based on the wear mark is to identify whether the hole diameter is still within the tolerance for the matching plugs.

5,38 €

Διαθέσιμο σε 15 εργάσιμες

Αγορά
BOSCH TILE DRILL BIT CYL-9 CERAMIC, Ø 8MM

BOSCH TILE DRILL BIT CYL-9 CERAMIC, Ø 8MM

The Bosch CYL-9 Ceramic tile drill bit is the right choice when drilling in tiles. Dry drilling without cooling is possible, which makes working with this drill effortless and enjoyable. It has a simple, spiral-less design, which is particularly suitable for drilling soft to medium-hard tiles. It is compatible with cylindrical drill chucks for wired or battery-powered drills and impact drills and delivers perfect results when drilling without impact.

5,42 €

Διαθέσιμο σε 15 εργάσιμες

Αγορά
BOSCH HSS POINTTEQ DIN338, Ø 10.5MM X 133MM, 5 PIECES, DRILL WORKING LENGTH 87 MM

BOSCH HSS POINTTEQ DIN338, Ø 10.5MM X 133MM, 5 PIECES, DRILL WORKING LENGTH 87 MM

The HSS drills PointTeQ enables fast drilling in metal due to the PointTeQ designs on the drill bit, as the self-centering tip prevents migration. Due to the increased drilling rate heat and wear are reduced. The PointTeQ design at the drill tip remains sharp and maintains continuous use was. This drill is suitable for drilling through holes and centering holes in alloyed and unalloyed steel, in non-ferrous metal, cast steel, cast iron and plastics. The shank is cylindrical, equal to the diameter of the drill. It is suitable for stand drills and screwdrivers. There is a low risk of fracture, particularly for drills with a diameter of less than 6mm, because the drill has a high elastic body. The coated with Black Oxide groove allows for quick removal of the chips. The HSS drills PointTeQ made according to DIN 338th It is Type N (lower side rake angle) with a point angle of 135 degrees.

5,80 €

Διαθέσιμο σε 15 εργάσιμες

Αγορά
BOSCH HSS POINTTEQ DIN338, Ø 7MM X 109MM, 10 PIECES, DRILL WORKING LENGTH 69 MM

BOSCH HSS POINTTEQ DIN338, Ø 7MM X 109MM, 10 PIECES, DRILL WORKING LENGTH 69 MM

The HSS drills PointTeQ enables fast drilling in metal due to the PointTeQ designs on the drill bit, as the self-centering tip prevents migration. Due to the increased drilling rate heat and wear are reduced. The PointTeQ design at the drill tip remains sharp and maintains continuous use was. This drill is suitable for drilling through holes and centering holes in alloyed and unalloyed steel, in non-ferrous metal, cast steel, cast iron and plastics. The shank is cylindrical, equal to the diameter of the drill. It is suitable for stand drills and screwdrivers. There is a low risk of fracture, particularly for drills with a diameter of less than 6mm, because the drill has a high elastic body. The coated with Black Oxide groove allows for quick removal of the chips. The HSS drills PointTeQ made according to DIN 338th It is Type N (lower side rake angle) with a point angle of 135 degrees.

5,80 €

Διαθέσιμο σε 15 εργάσιμες

Αγορά
BOSCH HSS POINTTEQ 338, Ø 7.5 MM X 109MM, 10 PIECES, DRILL WORKING LENGTH 69 MM

BOSCH HSS POINTTEQ 338, Ø 7.5 MM X 109MM, 10 PIECES, DRILL WORKING LENGTH 69 MM

The HSS drills PointTeQ enables fast drilling in metal due to the PointTeQ designs on the drill bit, as the self-centering tip prevents migration. Due to the increased drilling rate heat and wear are reduced. The PointTeQ design at the drill tip remains sharp and maintains continuous use was. This drill is suitable for drilling through holes and centering holes in alloyed and unalloyed steel, in non-ferrous metal, cast steel, cast iron and plastics. The shank is cylindrical, equal to the diameter of the drill. It is suitable for stand drills and screwdrivers. There is a low risk of fracture, particularly for drills with a diameter of less than 6mm, because the drill has a high elastic body. The coated with Black Oxide groove allows for quick removal of the chips. The HSS drills PointTeQ made according to DIN 338th It is Type N (lower side rake angle) with a point angle of 135 degrees.

5,80 €

Διαθέσιμο σε 15 εργάσιμες

Αγορά
BOSCH HAMMER DRILL BITS SDS-PLUS-7X, Ø 8MM WORKING LENGTH 200MM

BOSCH HAMMER DRILL BITS SDS-PLUS-7X, Ø 8MM WORKING LENGTH 200MM

The SDS-plus 7X drills from Bosch offers an excellent service life when drilling in concrete. His 4-cutter full head is made out of high quality tungsten carbide, which increases the head and provides impact resistance. The continuous distribution of drilling force creates no power loss, which increases the overall service life. The diffusion welding technology (IDS) from Bosch achieved strong grip between the head and neck. In addition, the 4-helical design ensures the wide channels the effective Bohrmehlabtransport and so reduces the wear on the drill. The SDS-plus-7X drill bit is provided for use with rotary hammers with SDS-plus system in masonry, concrete and reinforced concrete. Based on the wear mark is to identify whether the hole diameter is still within the tolerance for the matching plugs.

7,04 €

Διαθέσιμο σε 15 εργάσιμες

Αγορά
BOSCH MINI X-LINE STONE DRILL SET, 7 PIECES GREEN, RETAIL

BOSCH MINI X-LINE STONE DRILL SET, 7 PIECES GREEN, RETAIL

The 7-part mini-X-Line Masonry Drill Bit Set 2607019581 includes a base set of rock drills with the most commonly used drill sizes. The masonry drill bit with schlagbohrfester hard metal tip suitable for masonry, limestone, natural and artificial stone

7,04 €

Διαθέσιμο σε 15 εργάσιμες

Αγορά
MAKITA DRILL SET 1-4 ", 5-PIECE

MAKITA DRILL SET 1-4 ", 5-PIECE

The 5 part drill set D-23759 Makita includes drills for wood, metal and stone having different diameters from 5mm to 6mm.

7,23 €

Διαθέσιμο σε 15 εργάσιμες

Αγορά
BOSCH HSS POINTTEQ DIN338, Ø 11MM X 142MM, 5 PIECES, DRILL WORKING LENGTH 94 MM

BOSCH HSS POINTTEQ DIN338, Ø 11MM X 142MM, 5 PIECES, DRILL WORKING LENGTH 94 MM

The HSS drills PointTeQ enables fast drilling in metal due to the PointTeQ designs on the drill bit, as the self-centering tip prevents migration. Due to the increased drilling rate heat and wear are reduced. The PointTeQ design at the drill tip remains sharp and maintains continuous use was. This drill is suitable for drilling through holes and centering holes in alloyed and unalloyed steel, in non-ferrous metal, cast steel, cast iron and plastics. The shank is cylindrical, equal to the diameter of the drill. It is suitable for stand drills and screwdrivers. There is a low risk of fracture, particularly for drills with a diameter of less than 6mm, because the drill has a high elastic body. The coated with Black Oxide groove allows for quick removal of the chips. The HSS drills PointTeQ made according to DIN 338th It is Type N (lower side rake angle) with a point angle of 135 degrees.

7,54 €

Διαθέσιμο σε 15 εργάσιμες

Αγορά
CABLEXPERT PRECISION SCREWDRIVER SET 23PCS

CABLEXPERT PRECISION SCREWDRIVER SET 23PCS

Σετ κατσαβιδιών 23 τεμαχίων Περιέχει τα πιο χρησιμοποιημένα κομμάτια όπως Torx, Phillips, κλπ Άνετη λαβή κατσαβιδιών ακριβείας ΠΡΟΔΙΑΓΡΑΦΕΣ Phillips: # 000, # 00, # 0, # 1, # 2 Θέση: # 00, # 0, # 1 Δισκοειδή: 1mm, 1,5mm, 2mm, 2,5mm, 3mm, 4mm Torx: Τ6, Τ7, Τ8, Τ9, Τ10, Τ15, Τ20 1x εύκαμπτη μπάρα επέκτασης 120 mm 1x λαβή κατσαβιδιών ακριβείας

7,77 €

Διαθέσιμο σε 2 με 3 εργάσιμες

Αγορά

Προβολή 1–15 από 82 Αποτελέσματα